Steam and condensate manifolds

AWH steam and condensate manifolds are compact assemblies, the housing of which has integrated shut-off valves. They can be fitted either with gland or bellows seals. The valves are completely maintainable, because the valve stem and the internal valve seat can be replaced when the valves start leaking due to soiling.

Steam and condensate manifolds are available for both vertical and horizontal mounting. In vertical manifolds, there are secondary connections on both sides of the manifold, but they are only on one side in horizontal manifolds. Lengths of manifolds and valve spacings can be specifically tailored.

For low condensate quantities

Steam and condensate manifolds can be applied, for example, for the distribution of steam used in the heat tracing of the steam as well as for the collection of formed condensate.

As optional extras, an insulation jacket is available that enables outdoor installation without a special protective casing.

Steam and condensate manifolds for large condensate volumes will be designed and manufactured to specification.


  • Ensiöyhde DN 40
  • Toisioyhde DN 15
  • PN 40, 63
  • Laipoin, kiertein, hitsausmuhvein, hitsauspäin
  • GS-C 25N, AISI 316

Need help?

Our professionals will gladly help you:

Contact us